Since I first started shooting, I’ve been a fan of 10mm. My first semi-auto handgun was a Glock 20, I’ve owned the Tanfoglio (EAA) Witness in 10mm, and a Kimber Camp Guard. What I’ve really wanted was a 10mm carbine. A few manufacturers toyed with AR versions back over a decade ago, but quickly disappeared. CMMG is doing a Banshee in 10mm, but they’re $1600. Hi-Point is doing a perfectly decent, if ugly, 10mm carbine. But a smaller centimeter gun has been banging around for over a decade, the TNW Aero Survival Rifle. I’ve thought of buying one for years and finally decided to pull the trigger on it.


The Aero came with a 28-round aftermarket Glock 20 magazine, and I dropped a Holosun red dot on it and took it out for a run at a local hillside used for target practice. Ranges spanned 10 to 50 yards. The accuracy was superb, but I was having repeated issues with the bolt not getting back far enough to eject the spent cartridge, which was then rammed back into the breech, jamming it so badly I had to unscrew the barrel and smack the but on the ground to get the barrel to come loose. After 50 rounds of this, I sent it back to the factory.

Even with the Coronanonsense, I had it back a week later. The bolt had been replaced and the barrel as well — the new one was threaded for a suppressor. No complaints there. Again, I had trouble with the same malfunction, but only with Armscor ammunition. It fired SIG-Sauer V-crown without fail. We took our time shooting, noting sharply different ejection on rounds that were getting out of the firearm. We decided the buffer spring might be too tight, so we backed it out a turn. Now only a few of the rounds were failing to eject or jamming in the breech. The ammunition was showing sharply different power. Another trip out I used some older Armscor without fail, and a box of nuclear load Action Ammunition. No malfunctions. But a new box of Armscor showed the same issues. Satisfied the issue was ammunition related, I shot up a few boxes of older Armscor and Action without fail.

So how does it shoot? In a word, superbly. Accuracy was solid out to 50 yards, with the rounds landing smack on where the Holosun was illuminating. The rounds were throwing milk jugs and can around the hillside in a way that the 5.56mm and .300 Blackout we were shooting didn’t.


Takedown of the rifle is easy. Knock out of the retaining pins on the trigger assembly, unscrew the barrel, pop out the cocking handle, and drop the bolt out the front of the receiver. There’s a single pin to remove the firing pin. Done. Cleaning is a bit of a chore: the rifle got fairly dirty, but nothing unusual.

So is it worth it? Mine cost $700 or so and yes — the quality of the build, the use of Glock mags, and the performance of the rifle was excellent, outside of the issues I had with a lot of bad ammo. Still, this could mean the rifle, if shooting .40 or .357 SIG might need the buffer tube backed out to prevent issues with failure to eject or feed.